Location： Home>>New Products

2.92TS20

Coaxial fixed attenuators are used in absorbing energy of transmission line, expanding power range and controlling power level, they are also used in accurately measuring power or spectrum of RF microwave transmitters accompany with small power meter, comprehensive tester or spectrum analyzer.

2.92TS20 coaxial fixed attenuators' average power 20W, frequency range from DC-40GHz and feature wide frequency band, low VSWR, flatness attenuation value and excellent capacity in anti-pulse and anti-burnout etc.



2.92TS10

Coaxial fixed attenuators are used in absorbing energy of transmission line, expanding power range and controlling power level, they are also used in accurately measuring power or spectrum of RF microwave transmitters accompany with small power meter, comprehensive tester or spectrum analyzer.

2.92TS10 coaxial fixed attenuators' average power 10W, frequency range from DC-40GHz and feature wide frequency band, low VSWR, flatness attenuation value and excellent capacity in anti-pulse and anti-burnout etc.



2.92TS5

Coaxial fixed attenuators are used in absorbing energy of transmission line, expanding power range and controlling power level, they are also used in accurately measuring power or spectrum of RF microwave transmitters accompany with small power meter, comprehensive tester or spectrum analyzer.

2.92TS5 coaxial fixed attenuators' average power 5W, frequency range from DC-40GHz and feature wide frequency band, low VSWR, flatness attenuation value and excellent capacity in anti-pulse and anti-burnout etc.



DTS200-LIM-DIN

Low Intermodulation attenuators can be used in situation of multiple port instruments transmission and reflect Intermodulation measuring and the passive Intermodulation of its own won’t affect the result of measuring. In two 20W power, Intermodulation of DTS-LIM serial low Intermodulation attenuators won’t over -150dBc that ensure to measure the intermodulation of the passive instrument exact. And this product also can be used in high precision test and measuring in amplifier.



LIM-WDTS200

LIM-WDTS200 low intermodulation attenuators’ average power is 200W frequency range is DC-3GHz. It provides a test terminal for intermodulation test and the passive Intermodulation of its own won’t affect the result of measuring. Under two 20W power, intermodulation of DTS-LIM serial low intermodulation terminations less than -120dBc that make the test result reasonable. And the termination can be also used in high precision test and measuring in amplifier.



LIM-DTS200

LIM-DTS200 low intermodulation attenuators’ average power is 200W frequency range is DC-3GHz. It provides a test terminal for intermodulation test and the passive Intermodulation of its own won’t affect the result of measuring. Under two 20W power, intermodulation of DTS-LIM serial low intermodulation terminations less than -120dBc that make the test result reasonable. And the termination can be also used in high precision test and measuring in amplifier.



LIM-WDTS100

LIM-WDTS100 low intermodulation attenuators’ average power is 100W frequency range is DC-3GHz. It provides a test terminal for intermodulation test and the passive Intermodulation of its own won’t affect the result of measuring. Under two 20W power, intermodulation of DTS-LIM serial low intermodulation terminations less than -120dBc that make the test result reasonable. And the termination can be also used in high precision test and measuring in amplifier.



LIM-DTS100

LIM-DTS100 low intermodulation attenuators’ average power is 100W frequency range is DC-3GHz. It provides a test terminal for intermodulation test and the passive Intermodulation of its own won’t affect the result of measuring. Under two 20W power, intermodulation of DTS-LIM serial low intermodulation terminations less than -120dBc that make the test result reasonable. And the termination can be also used in high precision test and measuring in amplifier.



LIM-DTS50-A

LIM-DTS50-A low intermodulation attenuators’ average power is 50W frequency range is DC-3GHz. It provides a test terminal for intermodulation test and the passive Intermodulation of its own won’t affect the result of measuring. Under two 20W power intermodulation of DTS-LIM serial low intermodulation terminations less than -120dBc that make the test result reasonable. And the termination can be also used in high precision test and measuring in amplifier.



LIM-TS5

LIM-TS5 low intermodulation attenuators’ average power is 2W frequency range is DC-3GHz. It provides a test terminal for intermodulation test and the passive Intermodulation of its own won’t affect the result of measuring. And the termination can be also used in high precision test and measuring in amplifier.



LIM-TS2

LIM-TS2 low intermodulation attenuators’ average power is 2W frequency range is DC-3GHz. It provides a test terminal for intermodulation test and the passive Intermodulation of its own won’t affect the result of measuring. And the termination can be also used in high precision test and measuring in amplifier.



GKTS2-2-xx-18-A7

Rotary Step attenuators are used to adjust the power signal level by step within certain frequency range without power off, they can also be used to adjust the test system's power level as inset attenuators, it is small with high accuracy and high stability etc.

GKTS2-2-XX-18-A7 type rotary step attenuators' average power 2W, frequency range from DC-18GHz, attenuation value 0-99dB by 1dB step.

 



GKTS2-2-xx-18-A6

Rotary Step attenuators are used to adjust the power signal level by step within certain frequency range without power off, they can also be used to adjust the test system's power level as inset attenuators, it is small with high accuracy and high stability etc.

GKTS2-2-XX-18-A6 type rotary step attenuators' average power 2W, frequency range from DC-18GHz, attenuation value 0-99dB by 1dB step.



GKTS-F

  Interface: RS-232, Provide computer controlling interface and communication protocol

Voltage: Provide AC~220V/5V power





















SMAF50

Coaxial fixed terminations absorb RF& microwave energy and are commonly used as dummy loads of antenna and transmitter. They are also used as match ports in many multiport microwave device such as circulator and directional coupler to make these ports which are not involved in the measurement be terminated in their characteristic impedance in order to ensure an accurate measurement.

SMAF50 coaxial fixed termination’s average power 50W, frequency range dc-26.5GHz and feature wide frequency band, low VSWR, excellent capacity in anti-pulse and anti-burnout.

 



SMAF25

Coaxial fixed terminations absorb RF& microwave energy and are commonly used as dummy loads of antenna and transmitter. They are also used as match ports in many multiport microwave device such as circulator and directional coupler to make these ports which are not involved in the measurement be terminated in their characteristic impedance in order to ensure an accurate measurement.

SMAF25 coaxial fixed termination’s average power 25W, frequency range dc-26.5GHz and feature wide frequency band, low VSWR, excellent capacity in anti-pulse and anti-burnout.



3.5TF50

Coaxial fixed terminations absorb RF& microwave energy and are commonly used as dummy loads of antenna and transmitter. They are also used as match ports in many multiport microwave device such as circulator and directional coupler to make these ports which are not involved in the measurement be terminated in their characteristic impedance in order to ensure an accurate measurement.

TF serial high power coaxial fixed termination’s average power 2W-10KW, frequency range dc-40GHz and feature wide frequency band, low VSWR, excellent capacity in anti-pulse and anti-burnout.

 



3.5TF25

Coaxial fixed terminations absorb RF& microwave energy and are commonly used as dummy loads of antenna and transmitter. They are also used as match ports in many multiport microwave device such as circulator and directional coupler to make these ports which are not involved in the measurement be terminated in their characteristic impedance in order to ensure an accurate measurement.

TF serial high power coaxial fixed termination’s average power 2W-10KW, frequency range dc-40GHz and feature wide frequency band, low VSWR, excellent capacity in anti-pulse and anti-burnout.

 



3.5TF10

Coaxial fixed terminations absorb RF& microwave energy and are commonly used as dummy loads of antenna and transmitter. They are also used as match ports in many multiport microwave device such as circulator and directional coupler to make these ports which are not involved in the measurement be terminated in their characteristic impedance in order to ensure an accurate measurement.

TF serial high power coaxial fixed termination’s average power 2W-10KW, frequency range dc-40GHz and feature wide frequency band, low VSWR, excellent capacity in anti-pulse and anti-burnout.

 



3.5TF5

Coaxial fixed terminations absorb RF& microwave energy and are commonly used as dummy loads of antenna and transmitter. They are also used as match ports in many multiport microwave device such as circulator and directional coupler to make these ports which are not involved in the measurement be terminated in their characteristic impedance in order to ensure an accurate measurement.

TF serial high power coaxial fixed termination’s average power 2W-10KW, frequency range dc-40GHz and feature wide frequency band, low VSWR, excellent capacity in anti-pulse and anti-burnout.

 



3.5TF2

Coaxial fixed terminations absorb RF& microwave energy and are commonly used as dummy loads of antenna and transmitter. They are also used as match ports in many multiport microwave device such as circulator and directional coupler to make these ports which are not involved in the measurement be terminated in their characteristic impedance in order to ensure an accurate measurement.

TF serial high power coaxial fixed termination’s average power 2W-10KW, frequency range dc-40GHz and feature wide frequency band, low VSWR, excellent capacity in anti-pulse and anti-burnout.

 



WTF200G

Inset terminations are used in quantitatively absorbing energy of RF and microwave system, they are commonly used as dummy loads of antenna and transmitter.

WTF serial wide-band Inset termination's average power from 80W-1000W, frequency range from DC-18GHz and the features include wide frequency band, low VSWR, excellent capacity in anti-pulse and anti-burnout etc.

 



WTF100G

Inset terminations are used in quantitatively absorbing energy of RF and microwave system, they are commonly used as dummy loads of antenna and transmitter.

WTF serial wide-band Inset termination's average power from 80W-1000W, frequency range from DC-18GHz and the features include wide frequency band, low VSWR, excellent capacity in anti-pulse and anti-burnout etc.

 



WTF300G

Inset terminations are used in quantitatively absorbing energy of RF and microwave system, they are commonly used as dummy loads of antenna and transmitter.

WTF serial wide-band Inset termination's average power from 80W-1000W, frequency range from DC-18GHz and the features include wide frequency band, low VSWR, excellent capacity in anti-pulse and anti-burnout etc.



TF200-LIM-DIN

Low intermodulation terminations provide a test terminal for intermodulation test and the passive Intermodulation of its own won’t affect the result of measuring. Under two 20W power, Intermodulation of TF-LIM serial low Intermodulation terminations less than -150dBc that make the test result reasonable. And the termination can be also used in high precision test and measuring in amplifier.



LIM-WTF200

LIM-WTF200 low intermodulation termination’s average power is 200W frequency range is DC-3GHz. It provides a test terminal for intermodulation test and the passive Intermodulation of its own won’t affect the result of measuring. Under two 20W power, intermodulation of TF-LIM serial low intermodulation terminations less than -120dBc that make the test result reasonable. And the termination can be also used in high precision test and measuring in amplifier.



TF100-LIM-DIN

Low intermodulation terminations provide a test terminal for intermodulation test and the passive Intermodulation of its own won’t affect the result of measuring. Under two 20W power, Intermodulation of TF-LIM serial low Intermodulation terminations less than -150dBc that make the test result reasonable. And the termination can be also used in high precision test and measuring in amplifier.



LIM-WTF100

LIM-WTF100 low intermodulation termination’s average power is 100W frequency range is DC-3GHz. It provides a test terminal for intermodulation test and the passive Intermodulation of its own won’t affect the result of measuring. Under two 20W power, intermodulation of TF-LIM serial low intermodulation terminations less than -120dBc that make the test result reasonable. And the termination can be also used in high precision test and measuring in amplifier.



LIM-TF100

LIM-TF100 low intermodulation termination’s average power is 100W frequency range is DC-3GHz. It provides a test terminal for intermodulation test and the passive Intermodulation of its own won’t affect the result of measuring. Under two 20W power, intermodulation of TF-LIM serial low intermodulation terminations less than -120dBc that make the test result reasonable. And the termination can be also used in high precision test and measuring in amplifier.



LIM-TFE50

LIM-TFE50 low intermodulation termination’s average power is 50W frequency range is DC-3GHz. It provides a test terminal for intermodulation test and the passive Intermodul-

ation of its own won’t affect the result of measuring. Under two 20W power, intermodulation of TF-LIM serial low intermodulation terminations less than -120dBc that make the test result reasonable. And the termination can be also used in high precision test and measuring in amplifier.

 



LIM-TF5

LIM-TF5 low intermodulation termination’s average power is 5W frequency range is DC-3GHz. It provides a test terminal for intermodulation test and the passive Intermodulation of its own won’t affect the result of measuring. And the termination can be also used in high precision test and measuring in amplifier.



LIM-TF2-A

LIM-TF2-A low intermodulation termination’s average power is 2W frequency range is DC-3GHz. It provides a test terminal for intermodulation test and the passive Intermodulation of its own won’t affect the result of measuring. And the termination can be also used in high precision test and measuring in amplifier.



SHX-ZJ-4G

3dB hybrids can get the continuous sampling from transmission power along with the certain direction of transmission line and split the input signal into two equal signals with 90° difference in phase. They are mainly used to combine different signals to enhance the signal utility.

SHX-ZJ serial 3dB hybrid’s average power 200W , frequency according to customer's demand and could reach 3000-4000MHz.





DTO-0-24

Directional couplers are used to supervise and control transmitter's output power and output spectrum, they are also taken as a power meter together with detector or level indicator.

DTO-0-24 single directional couplers' input power is  100W, frequency covers 0.1-0.4GHz. The features include: compact small size, light, low loss of mainline transmission, excellent flatness in frequency response of coupling value, high power capacity, stable performance and high reliability etc.



DTO-600/3900-40H

Directional couplers are used to supervise and control transmitter's output power and output spectrum, they are also taken as a power meter together with detector or level indicator.

DTO-600/3900-40H single directional couplers' input power is 150W, frequency covers 0.6-3.9GHz. The features include: compact small size, light, low loss of mainline transmission, excellent flatness in frequency response of coupling value, high power capacity, stable performance and high reliability etc.



DTO-6-16

Directional couplers are used to supervise and control transmitter's output power and output spectrum, they are also taken as a power meter together with detector or level indicator.

DTO-6-16 single directional couplers' input power is 300mW, frequency covers 0.3-6GHz. The features include: compact small size, light, low loss of mainline transmission, excellent flatness in frequency response of coupling value, high power capacity, stable performance and high reliability etc.



SHX801-10-F

SHX801-10-F coaxial switches fit switch between multiple port signals, with TTL drive. It has been applied widely in test system and signal control box. Feature is capability steady, high frequency, high isolation and high repetition.



SHX652-1×4

SHX652-1×4 switch control box belong to view mechanical/programmable control box serial. Integrate one or more coaxial switches inside. Through mechanical or programmable to control channel switch and display state of switches. Auto operation achieve by control software after control box connect computer.

Frequency range is DC～8GHz, feature is high precision, easy operation, high frequency, capability steady, expansibility better and etc. It has be applied widely in microwave, switch and control.

 



SHX615-2×6

SHX615-2×6 switch control box belong to view mechanical/programmable control box serial. Integrate one or more coaxial switches inside. Through mechanical or programmable to control channel switch and display state of switches. Auto operation achieve by control software after control box connect computer.

Frequency range is DC～18GHz, feature is high precision, easy operation, high frequency, capability steady, expansibility better and etc. It has been applied widely in microwave, switch and control.

 



SHX-GSW-4-006

Solid-state switch for multi-channel microwave signal switching applications, according to the control mode into TTL or RS232 type. In various test systems, signal control are widely used. GSW-type solid-state switch with stable performance, high-speed switching (ns level), high isolation, low VSWR and high repeatability, etc., it is a long life, high reliability products.



SHX-GSW-2-006

Solid-state switch for multi-channel microwave signal switching applications, according to the control mode into TTL or RS232 type. In various test systems, signal control is widely used. GSW-type solid-state switch with stable performance, high-speed switching (ns level), high isolation, low VSWR and high repeatability, etc., it is a long life, high reliability products.



SHX-GSW-4-0327

Solid state switches are applied in multiple microwave switch situation, controlled by TTL or RS232. It is used in each testing system and signal control box. The features of GSW solid state switch include: capability steady, high speed (ns), high isolation, law VSWR. It’s a long mechanical life, high reliability product



SHX-GSW-2-0327

Solid state switches are applied in multiple microwave switch situation, controlled by TTL or RS232. It is used in each testing system and signal control box. The features of GSW solid state switch include: capability steady, high speed (ns), high isolation, law VSWR. It’s a long mechanical life, high reliability product.





SHX-0.8/3-16S(N)

SHX-0.8/3-16S(N) power dividers are used in broad-band transmission and reflect coefficient test by separating signals in order to test and accurately distribute one signal to antennas.



SHX-0.8/3-8S(N)

SHX-0.8/3-8S(N) power dividers are used in broad-band transmission and reflect coefficient test by separating signals in order to test and accurately distribute one signal to antennas.



SHX-0.8/3-4S(N)

SHX-0.8/3-4S(N) power dividers are used in broad-band transmission and reflect coefficient test by separating signals in order to test and accurately distribute one signal to antennas.



SHX-0.8/3-2S(N)(3S)

SHX-0.8/3-2S(N)(3S) power dividers are used in broad-band transmission and reflect coefficient test by separating signals in order to test and accurately distribute one signal to antennas.



SHX4PD0639C

SHX4PD0639C power dividers are used in broad-band transmission and reflect coefficient test by separating signals in order to test and accurately distribute one signal to antennas.



SHX2PD0639C

SHX2PD0639C power dividers are used in broad-band transmission and reflect coefficient test by separating signals in order to test and accurately distribute one signal to antennas.



GZL-2.92

DC-Blocks prevent DC current flow while permitting RF power to flow, thus to isolate DC power from signal sources and measure instruments with broadband performance and low insertion loss.



SMA-R

The right angle of SMA adapters are high repeatability, low VSWR and low loss devices that operate from DC to 18 GHz. They offer all combinations for adapting. They are also useful as “test port and cable savers” when used with vector network analyzers with stable electricity performance.